前のトピックを表示 :: 次のトピックを表示 |
投稿者 |
メッセージ |
Dan J
登録日: 2013.09.19 記事: 8
|
日時: Thu Sep 19, 2013 5:35 pm 記事の件名: UFOCapture V2 FTP problems |
|
|
Hi Sonota
I've just begun using UFOCapture v2 after completing my dome camera and placing on the roof.
I'm having an issue with FTP.
At first it was TLS/SSL error, so I enabled non encrypted FTP.
It appears to be working, and has created a new daily file but no files are being uploaded.
I also cannot see a lo file that identifies what is wrong.
I should note I'm using a Synology DS1511 NAS as my FTP storage.
I've also tried SFTP : 22 and FTP: 21
Could you please assist.
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12654 所在地: 139.67E 35.65N
|
日時: Thu Sep 19, 2013 7:55 pm 記事の件名: Re: UFOCapture V2 FTP problems |
|
|
Hi Dan J
I would like to confirm the situation.
Let me see a snapshot of your setting of operation sheet and FTP dialog like an image below.
and
Dan J wrote: | It appears to be working, and has created a new daily file but no files are being uploaded. |
What is "a new daily file" ? Is it created by UFOCaptureV2 ?
Did you get any FTP error message on the blue bar, when a FTP transfer works?
(that shows only "Detecting" normally).
SonotaCo
説明: |
setting for
http://sonotaco.sub.jp/live/ |
|
ファイルサイズ: |
129.09 KB |
閲覧数: |
12426 回 |
|
|
|
トップに戻る |
|
|
Dan J
登録日: 2013.09.19 記事: 8
|
日時: Thu Sep 19, 2013 8:17 pm 記事の件名: |
|
|
I have a directory within the FTP location named UFOCapture
It appears to have created the date directory. but it is unable to FTP files after a detection.
My DB location is on the capture PC desktop folder location.
see screenshot attached.:
説明: |
|
ダウンロード |
ファイル名: |
settings.JPG |
ファイルサイズ: |
252.13 KB |
ダウンロード回数: |
1251 回 |
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12654 所在地: 139.67E 35.65N
|
日時: Thu Sep 19, 2013 8:47 pm 記事の件名: |
|
|
Thanks for info, it helps me a lot.
I noticed below.
1. Please use FTP port 21 because UFOCapture does not support sftp.
2. Please use Passive mode. it is generally used.
3. I recommend to use the name of the directory "ufocapture" not "UFOCapture".
because the case sensitivity often causes troubles on FTP.
4. desktop directory often causes many troubles, because it sometimes contains space or language depended characters.
So please make "C:\cap" or D:\cap directory and assign it as the DB dir of UFOCapture.
Please try these.
If the FTP error message changes, please let me know it.
Here is a very beautiful full moon now in Japan, Good night.
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12654 所在地: 139.67E 35.65N
|
日時: Thu Sep 19, 2013 8:59 pm 記事の件名: |
|
|
Oh .... it was a big snapshot.....
There were hints!!
you are looking \\Deskstation\ftp\UFOCapture\2013\....
This means you have assigned " \\Deskstation\ftp\UFOCapture" as DB dir of UFOCapture.
It is not normal usage. it may not work at all.
You should set local C:\cap or D:\Cap direcory as the DB dir of UFOCapture.
UFOCapture creates capture files there and will transfer some specified files from there to ftp server ( Deskstation) via FTP.
There will be no subdirecry created on the FTP server..
The FTP function of UFOCaptureV2 is for web monitoring web page. Not for clip strage.
All clips incude avi files should be stored to local HDD/SSD (that has enough writing speed) only.
Please build a stand alone system first.
|
|
トップに戻る |
|
|
Dan J
登録日: 2013.09.19 記事: 8
|
日時: Thu Sep 19, 2013 9:17 pm 記事の件名: |
|
|
What directory do I use for FTP?
I have tried your settings but I get FTP Dir Error.
I am confused my standalone?
I have UFOCapture running on standalone PC, and DB on same PC.
Does FTP not work on network PC?
説明: |
|
ダウンロード |
ファイル名: |
settings2.JPG |
ファイルサイズ: |
210.07 KB |
ダウンロード回数: |
1231 回 |
|
|
トップに戻る |
|
|
Dan J
登録日: 2013.09.19 記事: 8
|
日時: Thu Sep 19, 2013 9:21 pm 記事の件名: |
|
|
My DB location is now C:\UFO222
I have renamed FTP folder on network PC to ufocapture but now it does not work.
The other window shows the FTP location via network drive.
I can access this directory from the Internet via wan ip, or FTP client using internal IP address. The path shouldn't matter of th network share you see there.
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12654 所在地: 139.67E 35.65N
|
日時: Thu Sep 19, 2013 10:01 pm 記事の件名: |
|
|
Dan J wrote: |
I have renamed FTP folder on network PC to ufocapture but now it does not work. |
What error message did you get?
FTP dir error happens when the assigned directory does not exist in FTP server root directory. So if you got same this error, it means the directory names are not equal yet.
OK.
I recommend to confirm step by step.
Firstly, please check OFF the "FTP" checkbox of the operation sheet. to confirm stand alone capturing.
Please push Detect button to start detection, and after a while, push Rec button to start recording and again push Rec-off button to stop recording.
After a second, you will get a clip files C:\UFO222\2013\201309\....\M20130919_.....
Are there?
Please replay the avi file. Is it OK?
if not, do not proceed further, but solve the stand alone problem first.
If OK, then check ON the FTP check box.
Rec Rec-off again to get new clip.
Then what happened?
If there is no error message, then you will be able to see the \\Deskstation\ftp\ufocapture\ufox.jpg and else.
They are the FTPed files.
Sorry it is time to stop my PC. The next answer will take 9 hours.
|
|
トップに戻る |
|
|
Dan J
登録日: 2013.09.19 記事: 8
|
日時: Thu Sep 19, 2013 11:00 pm 記事の件名: |
|
|
Using version UFO222
avi is Ok. It saves to correct directory, and I can replay.
I test ftp from command prompt and it is ok.
I save settings, check ftp checkbox, record and stop. it still says FTP: dir error
But it is connecting ftp, as you can see in screenshot.
Also latest version is using wrong folder naming, it is using 2001 not 2013.
It is also saving to my documents folder, and not the folder I select C:\UFO2
see screenshots
If you wish I can give you teamviewer remote access to my PC to look further.
Please let me know if you would like settings, maybe we can communicate via Skype or email further.
説明: |
|
ダウンロード |
ファイル名: |
settingswrong.JPG |
ファイルサイズ: |
258.22 KB |
ダウンロード回数: |
1199 回 |
説明: |
|
ダウンロード |
ファイル名: |
ftp.JPG |
ファイルサイズ: |
385.46 KB |
ダウンロード回数: |
1228 回 |
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12654 所在地: 139.67E 35.65N
|
日時: Fri Sep 20, 2013 8:30 am 記事の件名: |
|
|
Good morning.
Dan J wrote: |
Also latest version is using wrong folder naming, it is using 2001 not 2013.
It is also saving to my documents folder, and not the folder I select C:\UFO2
see screenshots |
This point is so strange. There must be some confusion. Let us clear it first.
(I think the 2001 directory is not made at this time.
And the contents in your my documents is made at a time when DB dir was not assigned.)
So let fix the situation and delete old ones that cause confusions. Please do follows.
1.
the latest version of UFOCaptureV2 is V2.24
Please download V2,24 from below. Overwrite of UFO2.exe will be enough.
http://sonotaco.com/soft/e_index.html#ufocv2
2.
Please check "PeakHold" not "SnapShot" on the Still Image Capture section of Operation sheet.
This is the most popular setting.
3.
Make C:\Cap directory and assign it as DB dir in DB sheet.
Close UFOCaptureV2 once.
4.
Delete all other old directories or files that makes confusion.
C:\UFO2\2001
M20* in your my documents directory
5.
Do capture test and confirm the captured files.
They must be C:\Cap\2013\201309\20130920\
Their names are M20130920_xxxxxxxx...
are they?
----
Sorry, I do not use Skype. Let us continue here if it is OK.
Thank you for patience. I feel the goal is not so far.
|
|
トップに戻る |
|
|
Dan J
登録日: 2013.09.19 記事: 8
|
日時: Fri Sep 20, 2013 11:35 am 記事の件名: |
|
|
I will need to test tomorrow as I will be away for one day.
1. Is the previous version required? Or can I just delete old files and start with latest version.
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12654 所在地: 139.67E 35.65N
|
日時: Fri Sep 20, 2013 12:29 pm 記事の件名: |
|
|
Dan J wrote: | 1. Is the previous version required? |
No.
Dan J wrote: | Or can I just delete old files and start with latest version. |
Yes.
Let us make problem as simple as possible, to reach goal.
|
|
トップに戻る |
|
|
Dan J
登録日: 2013.09.19 記事: 8
|
日時: Sun Sep 22, 2013 11:32 pm 記事の件名: |
|
|
Thanks for tips, I did as you mentioned and managed to solve that problem.
I still however get FTP Dir Error problems.. do you have ability to check FTP error log?
The problem with date folder was the changedate option box. This created the 2001 folder. When option not ticket, current date worked correctly.
see screenshot
説明: |
|
ダウンロード |
ファイル名: |
changedate.JPG |
ファイルサイズ: |
266.68 KB |
ダウンロード回数: |
1167 回 |
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12654 所在地: 139.67E 35.65N
|
日時: Mon Sep 23, 2013 9:36 am 記事の件名: |
|
|
Dan J wrote: | Thanks for tips, I did as you mentioned and managed to solve that problem. | Congratulations!
Dan J wrote: | I still however get FTP Dir Error problems.. do you have ability to check FTP error log? |
I am not sure.The FTP process is done between Microsoft inner modules and the NAS firmware, it is outside of application program.
But I guess, This FTP Dir Error may happen as below.
FTP logon from 192.168.1.7 to 192.168.1.6 was succeeded.
FTP change directory 192.168.1.6\(FTPROOT) to 192.168.1.6\(FTPROOT)\ufocapture was not succeeded.
Possible cause may be some of below.
"ufocapture" directory does not exist in FTP root directory of FTP server.
Permission setting of "ufocapture" directory does not permit change directory or creating file.
Security protection of the FTP server (such as hosts file) or firewall between blocks the access.
You said "I test ftp from command prompt and it is ok".
So... you may be test change directory to "ufocapture" and transfer some files manually.
I guess that there you can find some error cause......
Dan J wrote: | The problem with date folder was the changedate option box. | Understood.
---- Today is the autumn equinox, a natianal holiday in Japan.
|
|
トップに戻る |
|
|
|