SonotaCo.JP
SonotaCo Network Japan Forum
SonotaCo.JP Forum Index
homeTop Page  FAQFAQ   検索検索   メンバーリストメンバーリスト   ユーザーグループユーザーグループ   登録する登録する 
 プロフィールプロフィール   プライベートメッセージをチェックするプライベートメッセージをチェックする   ログインログイン 

Lyrides radiant in UFO Orbit

 
新しいトピックを投稿   トピックに返信    SonotaCo.JP Forum Index -> UFOCapture BBS in English
前のトピックを表示 :: 次のトピックを表示  
投稿者 メッセージ
Martin Dubs



登録日: 2014.03.04
記事: 56

記事日時: Fri Jun 13, 2014 2:40 am    記事の件名: Lyrides radiant in UFO Orbit 引用付きで返信

Hello,

with UFO Orbit I analyzed some Lyrides. In the radiant graph they are centered around the correct position within the radiant J5_Lyr. In the trail map they are also at the expected position but the J5_lyr stream is about 15° off at 285° RA and 28°dec. Why? See attached image. Something similar happens with the eta Aquarides, but in this case only when the corresponding stream is selected. With all streams selected the location is correct. Did I set something incorrectly?

Regards, Martin



Lyrides Radiant.PNG
 説明:
 ファイルサイズ:  61.23 KB
 閲覧数:  6152 回

Lyrides Radiant.PNG



etaAqu Radiant.PNG
 説明:
 ファイルサイズ:  58.02 KB
 閲覧数:  6150 回

etaAqu Radiant.PNG


トップに戻る
ユーザーのプロフィールを表示   投稿者のウェブサイトに移動
SonotaCo
Site Admin


登録日: 2004.08.07
記事: 12653
所在地: 139.67E 35.65N

記事日時: Fri Jun 13, 2014 5:43 am    記事の件名: 引用付きで返信

Hi Martin
Yes, It looks radiant plot of each meteor (yellow and green) is correct, but the blue shower area display is wrong.
Below is our plot on my desk.

There are two modes on Trail Map display. One is "stp" on, that shows the shower area at its peak sol. .. your case.
And the other is "stp" off that shows the shower area position on the middle of displayed sol range.
In this case, sol that is used to decide the shower position is displayed on the left top position of the Tmap, like shown as "[radiant sol =32.6 4/22]" in my figure.
Basically, I recommend to "stp" off if you plot a narrow sol range.

But even if stp=on my desk, the lyr shower area did not move so much like your figure, on my desk.
You case can happen if the catalogue was modified.
I am not sure, but I would like to see the value of rap, decp, dra on your catalog.
Could you show me a snapshot like mine with stp off and rap decp dra visible ?



LyrUO2.JPG
 説明:
 ファイルサイズ:  357.85 KB
 閲覧数:  6137 回

LyrUO2.JPG




最終編集者 SonotaCo [ Fri Jun 13, 2014 6:08 am ], 編集回数 1 回
トップに戻る
ユーザーのプロフィールを表示  
SonotaCo
Site Admin


登録日: 2004.08.07
記事: 12653
所在地: 139.67E 35.65N

記事日時: Fri Jun 13, 2014 6:03 am    記事の件名: 引用付きで返信

Now I found the reason.
+d was set as 8 on your figure.
It cause +8 days to compute the shower radiant position,
that is why the radiant shifted.
check off the stp, and set 0 to +d then you can get normal position



lyrides_radiant_2.png
 説明:
here is the cause
 ファイルサイズ:  58.67 KB
 閲覧数:  6126 回

lyrides_radiant_2.png


トップに戻る
ユーザーのプロフィールを表示  
Martin Dubs



登録日: 2014.03.04
記事: 56

記事日時: Fri Jun 13, 2014 7:19 am    記事の件名: 引用付きで返信

Thanks for the quick answer,

in the meantime I studied the manual carefully and came to the same result. My mistake was that I did not notice the greyed out date shift. So this is clear now. What I still not quite understand is that when I select all streams what does the time shift mean, is it relative to the mid time of observation period?
Thanks for clarifying,

Martin
トップに戻る
ユーザーのプロフィールを表示   投稿者のウェブサイトに移動
SonotaCo
Site Admin


登録日: 2004.08.07
記事: 12653
所在地: 139.67E 35.65N

記事日時: Fri Jun 13, 2014 7:43 am    記事の件名: 引用付きで返信

Martin Dubs wrote:
t when I select all streams what does the time shift mean, is it relative to the mid time of observation period?

Sorry, there is no meaning stp ON and +d not equal to zero.
please set +d zero for usual.
トップに戻る
ユーザーのプロフィールを表示  
特定期間内の記事を表示:   
新しいトピックを投稿   トピックに返信    SonotaCo.JP Forum Index -> UFOCapture BBS in English All times are GMT + 9 Hours
Page 1 of 1

 
移動先:  
新規投稿: 不可
返信投稿: 不可
記事編集: 不可
記事削除: 不可
投票参加: 不可
このフォーラムで添付ファイルを投稿 できません
このフォーラムでファイルをダウンロード できます


Powered by phpBB © 2001, 2005 phpBB Group
Copyright ©2004 SonotaCo Network. All Rights Reserved.