前のトピックを表示 :: 次のトピックを表示 |
投稿者 |
メッセージ |
allistairg1964
登録日: 2017.01.08 記事: 12
|
日時: Sat Jan 14, 2017 7:08 am 記事の件名: some setup help please |
|
|
Hi
I am in the process in setting up a meteor camera
the capture card I am trying to use is Viewcast Osprey-210 Video Capture Adapter - PCI
(BNC OUT PUT)
I am using both xp and windows 7
Pc spec very good
can anyone guide me on the correct settings?
thank you
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12669 所在地: 139.67E 35.65N
|
日時: Sat Jan 14, 2017 8:34 am 記事の件名: Re: some setup help please |
|
|
Hi, welcome here.
Quote: | the capture card I am trying to use is Viewcast Osprey-210 Video Capture Adapter - PCI
| Have you have it already?
Which model (CCIR or EIA, means signal format PAL or NTSC) of camera are you using?
|
|
トップに戻る |
|
|
allistairg1964
登録日: 2017.01.08 記事: 12
|
日時: Sat Jan 14, 2017 10:02 am 記事の件名: Re: some setup help please |
|
|
Thank you for the welcome
not 100% sure which model
I am using PAL
I have 2 cameras to use 1/ Watec 902H, 2/ Samsung SCB-2000
Thanks
SonotaCo wrote: | Hi, welcome here.
Quote: | the capture card I am trying to use is Viewcast Osprey-210 Video Capture Adapter - PCI
| Have you have it already?
Which model (CCIR or EIA, means signal format PAL or NTSC) of camera are you using? |
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12669 所在地: 139.67E 35.65N
|
日時: Sat Jan 14, 2017 3:09 pm 記事の件名: |
|
|
OK, let's assume PAL.
Firstly, to see the input video on Live sheet of UFOCaptureV2, do following steps.
0. Install Osprey-210 device driver and UFOCaptureV2, and provide video signal to the capture card..
1. open Operation sheet and push Read Settings and select PF720x576N.ufi.
This is the default setting for PAL 720x576 25.0fps night sky observation.
2. confirm the setting Xi Yi fps on the Input sheet
3. select Vdeo device name, and the input terminal name on the Input sheet
(I don't know the device name of Osprey-210, let me see all the names listed in the drop down box, if problem happens)
4. push preview botton on Live sheet to see the live video on it.
What happens?
let me see the snap shot of your Input sheet here.
説明: |
Read default setting for PAL |
|
ファイルサイズ: |
77.82 KB |
閲覧数: |
7037 回 |
|
説明: |
|
ファイルサイズ: |
49.91 KB |
閲覧数: |
7037 回 |
|
|
|
トップに戻る |
|
|
allistairg1964
登録日: 2017.01.08 記事: 12
|
日時: Sat Jan 14, 2017 5:48 pm 記事の件名: |
|
|
Wow thank you so much for your help I will test this later
SonotaCo wrote: | OK, let's assume PAL.
Firstly, to see the input video on Live sheet of UFOCaptureV2, do following steps.
0. Install Osprey-210 device driver and UFOCaptureV2, and provide video signal to the capture card..
1. open Operation sheet and push Read Settings and select PF720x576N.ufi.
This is the default setting for PAL 720x576 25.0fps night sky observation.
2. confirm the setting Xi Yi fps on the Input sheet
3. select Vdeo device name, and the input terminal name on the Input sheet
(I don't know the device name of Osprey-210, let me see all the names listed in the drop down box, if problem happens)
4. push preview botton on Live sheet to see the live video on it.
What happens?
let me see the snap shot of your Input sheet here. |
|
|
トップに戻る |
|
|
allistairg1964
登録日: 2017.01.08 記事: 12
|
日時: Sat Jan 14, 2017 11:12 pm 記事の件名: |
|
|
Hi
Thank you so much that worked
SonotaCo wrote: | OK, let's assume PAL.
Firstly, to see the input video on Live sheet of UFOCaptureV2, do following steps.
0. Install Osprey-210 device driver and UFOCaptureV2, and provide video signal to the capture card..
1. open Operation sheet and push Read Settings and select PF720x576N.ufi.
This is the default setting for PAL 720x576 25.0fps night sky observation.
2. confirm the setting Xi Yi fps on the Input sheet
3. select Vdeo device name, and the input terminal name on the Input sheet
(I don't know the device name of Osprey-210, let me see all the names listed in the drop down box, if problem happens)
4. push preview botton on Live sheet to see the live video on it.
What happens?
let me see the snap shot of your Input sheet here. |
|
|
トップに戻る |
|
|
|