前のトピックを表示 :: 次のトピックを表示 |
投稿者 |
メッセージ |
Stephane
登録日: 2008.10.12 記事: 92
|
日時: Tue Nov 25, 2008 3:17 pm 記事の件名: UFOCapture request |
|
|
Dear SonotaCo,
Is it possible to add Action command (to launch .bat or .exe for exemple) in UFOCapture Detect Schedule Adjust Settings windows for all Sunrise and Sunset adjustement? With this, it will be possible to command the power ON and the power OFF of the camera.
What do you think about it?
Best Regards.
Stephane |
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12653 所在地: 139.67E 35.65N
|
日時: Tue Nov 25, 2008 6:43 pm 記事の件名: Re: UFOCapture request |
|
|
Stephane wrote: | Dear SonotaCo,
Is it possible to add Action command (to launch .bat or .exe for exemple) in UFOCapture Detect Schedule Adjust Settings windows for all Sunrise and Sunset adjustement? With this, it will be possible to command the power ON and the power OFF of the camera.
What do you think about it?
Best Regards.
Stephane |
It a good idea. But it needs PC controllable power switch.
There may be few people who have those things.
Do you have it? Is it available for everyone?
I have made a task scheduler that can assign relative time to sun set/raise.
Its name is "NightSchedular". It is not opened because I did not write a manual.
If there are many people who wants that, I will consider to publish it. |
|
トップに戻る |
|
|
Stephane
登録日: 2008.10.12 記事: 92
|
日時: Fri Nov 28, 2008 3:38 pm 記事の件名: |
|
|
I think to develop a parrallele, serial or USB module for this. Nethertheless, pehaps this already existes on the market. I will checked it.
I think NightSchedular software is interesting. Pehaps this software is clear and it is not necessary to write a manual
Stephane |
|
トップに戻る |
|
|
Stephane
登録日: 2008.10.12 記事: 92
|
日時: Fri Nov 28, 2008 9:04 pm 記事の件名: |
|
|
Dear SonotaCo,
I found a module which can be used: DLP Design - DLP-IOR4 for exemple of FDI Chip (http://www.ftdichip.com). It's possible to developpe a specific module for UFO Capture to based on FDI chip too.
Stephane |
|
トップに戻る |
|
|
Stephane
登録日: 2008.10.12 記事: 92
|
日時: Sat Jan 17, 2009 10:24 pm 記事の件名: |
|
|
Dear SonotaCo,
Before to use a module piloted by UFOcapture I developped a night detector module to power ON and power OFF the camera. Module based on LDR captor.
But I have an issue with UFO capture when I use this module: When the camera go to power OFF, the UFOcapture detects this like a meteor detection and the HDD drive record this wrong meteor detection until that the camera is powered ON.
Is it possible possible that UFOCapture detects if the camera is power ON or OFF? or pehaps this option already exist?
For the next step in order to use an external module to control the power supply of the camera, is it possible that the UFOcapture create a file (TXT or other) with a flag e.i. ON or OFF following the states of Detect Schedule area in Operation Sheet?
Kind regards.
Stephane |
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12653 所在地: 139.67E 35.65N
|
日時: Sun Jan 18, 2009 8:18 am 記事の件名: |
|
|
Stephane wrote: | Is it possible possible that UFOCapture detects if the camera is power ON or OFF? or pehaps this option already exist? |
It depends on the capture device driver. For IEEE1394 device driver, the driver enables its interface only the video signal is inputted.
But for others, there are many cases. Generally it is not noticed to applications.So it may be impossible or very difficult.
Stephane wrote: | is it possible that the UFOcapture create a file (TXT or other) with a flag e.i. ON or OFF following the states of Detect Schedule area in Operation Sheet? |
UFOCaptureV2 always outputs "detlog.csv" to its month directory. The time of detect start and end is logged. I don't know whether it helps your plan or not, but please check it. |
|
トップに戻る |
|
|
Stephane
登録日: 2008.10.12 記事: 92
|
日時: Sun Jan 18, 2009 8:46 pm 記事の件名: |
|
|
Dear SonotaCo,
I checked the detlog.csv file but this doesn't help me. The best way (and easy I think) is like when the software has been detected a meteor it can do an action (Action part in Operation sheet) like by Beep (.wav) or Action (.bat). Is it possible to add this (.bat is enough) in Detect Schedule in UFO Capture Detect Schedule Adjust Settings box. With this it will be easy to control a .bat in order to command a relay for exemple.
Regards.
Stéphane Jouin |
|
トップに戻る |
|
|
Stephane
登録日: 2008.10.12 記事: 92
|
日時: Tue Jan 20, 2009 8:31 pm 記事の件名: |
|
|
Dear SanatoCo,
What do you think about it?
Regards.
Stéphane |
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12653 所在地: 139.67E 35.65N
|
日時: Tue Jan 20, 2009 9:51 pm 記事の件名: |
|
|
Hi
Stephane wrote: | What do you think about it? |
I think power ON of camera should be before the start of detection.
Therefore control from UFOCapture will not work well.
I will not add a function to UFOCapture, if it is not sure.
But I am understanding your purpose. You have made an hardware.
Though I have not enough time now,I will think about the publishing of NightSchedular .
Please wait for a few weeks. |
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12653 所在地: 139.67E 35.65N
|
日時: Tue Jan 20, 2009 10:33 pm 記事の件名: |
|
|
SonotaCo wrote: |
Though I have not enough time now,I will think about the publishing of NightSchedular .
Please wait for a few weeks. |
It did not take even a day .
I gave up to write a English Manual .
Use this as it is.
http://sonotaco.com/soft/download/NS001.ZIP |
|
トップに戻る |
|
|
Stephane
登録日: 2008.10.12 記事: 92
|
日時: Wed Jan 21, 2009 5:44 am 記事の件名: |
|
|
Dear Sonotaco,
I'm going to try it. It seems that it's exactly that I search.
Thanks and kind regards.
Stephane |
|
トップに戻る |
|
|
|