前のトピックを表示 :: 次のトピックを表示 |
投稿者 |
メッセージ |
Serj
登録日: 2012.08.20 記事: 2 所在地: Tver, Russia
|
日時: Sun Aug 04, 2013 11:27 pm 記事の件名: Basler scA1600-14gm for meteor hunting |
|
|
Hello! Accept a beginner to your team.
Recently I decided to try their Basler scA1600-14gm to catch meteors. Frankly, I'm delighted with the first results, and want to share with you my joy. I used a trial version of UFOCaptureHD, and Kowa LM6NCM lens.
Now I'm waiting for a powerful PC to provide the ability to shoot at 14FPS.
説明: |
|
ファイルサイズ: |
133.79 KB |
閲覧数: |
14963 回 |
|
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12653 所在地: 139.67E 35.65N
|
日時: Mon Aug 05, 2013 9:47 am 記事の件名: Re: Basler scA1600-14gm for meteor hunting |
|
|
Hi Serj
Thank you for posting. I believe it is the first succeeded report of HD GigE camera.
Your P.jpg is very impressive. hi-res 1616x1232 with so many stars that enable very accurate measurement!
Was it taken at 14fps? or lower rate?
Well, it seems the device driver(pylon Camera Software Suite) supports DirectShow interface
and has become usable with UFOCapture. It is a great news.
http://www.baslerweb.com/media/documents/BAS1303_scout_web_e.pdf
Anyway, we have very little experience with low frame rate like 14 fps,
so your information is very interesting. Thank you.
|
|
トップに戻る |
|
|
Serj
登録日: 2012.08.20 記事: 2 所在地: Tver, Russia
|
日時: Mon Aug 05, 2013 7:35 pm 記事の件名: Re: Basler scA1600-14gm for meteor hunting |
|
|
My old netbook with Atom N270 processor and 100Mbps Ethernet can run on only 2.7 FPS with this camera. So, exposure in this image was about 0.3 s (I do not remember exactly). Meteor in the video appeared only in single frame, however UFOCapture easily caught it. If shoot at 14FPS, then I think to lose about 1.5 magnitude.
When installing Pylon SDK, in the system appears also a standard DirectShow source. Of course, in this case 12-bit readout not used. But I do not dare to ask for it as long as I did not support the developer financially.
PS: A small addition. First, on a full frame (1628 x 1236) UFOCapture not working. Then I was a bit reduced resolution using ROI, making it multiple of 16, and application was working OK.
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12653 所在地: 139.67E 35.65N
|
日時: Tue Aug 06, 2013 8:44 am 記事の件名: |
|
|
Understood! Thanks for precise info.
|
|
トップに戻る |
|
|
|