前のトピックを表示 :: 次のトピックを表示 |
投稿者 |
メッセージ |
Bob Lambert
登録日: 2020.12.17 記事: 17
|
日時: Thu Oct 28, 2021 6:08 am 記事の件名: UFO Capture settings not saved |
|
|
Hello,
We have a problem with our UFO Capture settings. We want the "Single File Mode" to be unchecked on the operations tab, but frequently that setting changes to checked without our input. I have saved settings a few times, but it still changes on its own. How do I stop this setting from changing?
UFO Capture version 2.24, Dell Optiplex computer running Windows 10 Pro 64, Happauge Impact capture card, WATEC 910HX/RC camera.
Thanks for your help.
Roger
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12669 所在地: 139.67E 35.65N
|
日時: Thu Oct 28, 2021 7:02 am 記事の件名: |
|
|
Hi Roger
I tried to reproduce your problem, but I could not.
It seems it is caused by some complex reasons( The settings file can be broken ).
So please reset all settings.
All settings are saved in the "Settings.ufi" file in the UFO2 directory.
You can reset all settings by deleting this file.
(If you are using another .ufi file assigned in "Detect Schedule" (arrowed in the figure below), then the ufi file should be deleted also)
SonotaCo
説明: |
|
ファイルサイズ: |
36 KB |
閲覧数: |
1458 回 |
|
|
|
トップに戻る |
|
|
Bob Lambert
登録日: 2020.12.17 記事: 17
|
日時: Fri Oct 29, 2021 7:35 am 記事の件名: UFO Capture settings not saved |
|
|
Thank you, I will try your suggestion.
Roger
|
|
トップに戻る |
|
|
|