SonotaCo.JP
SonotaCo Network Japan Forum
SonotaCo.JP Forum Index
homeTop Page  FAQFAQ   検索検索   メンバーリストメンバーリスト   ユーザーグループユーザーグループ   登録する登録する 
 プロフィールプロフィール   プライベートメッセージをチェックするプライベートメッセージをチェックする   ログインログイン 

BBF Setting

 
新しいトピックを投稿   トピックに返信    SonotaCo.JP Forum Index -> UFOCapture BBS in English
前のトピックを表示 :: 次のトピックを表示  
投稿者 メッセージ
alfredocaronia



登録日: 2012.01.31
記事: 16777215
所在地: PIATRA NEAMT ROMANIA

記事日時: Thu Mar 06, 2014 8:37 pm    記事の件名: BBF Setting 引用付きで返信

Alfredo Caronia
2 min

Hi! All!

Topic: Botton Field First!

I enclose below a response from Sonotaco inserted in the Forum IMTN (Italian Meteor Network) in January 2013:

"It is" Bottom Field First "Profile of UFOCaptureV2 sheet.
ON means the video capture device make a frame That image contains the first (earlier) as a field of interlaced frame That field contains bottom line.
....
Simply,
Check ON at UFOCaptureV2 Profile sheet if you are using IEEE1394 capture device with builtin Window's device drivers.
Check OFF for other analog capture devices or progressive grabber.

UFOAnalyzerV2 try to check it automatically when "bbf check" on the UTY sheet is ON, but it can not be correct.
If you are confident in your BBF setting, then check off the "bbf check" on the UTY sheet. "

If, therefore, in most part of the cases ( analog camera ) should be left in "OFF", then I ask: So "bbf" should not be set nor in UA Profile nor in UA uty?
Opinions, advices?

Regards!

Alfredo Caronia
トップに戻る
ユーザーのプロフィールを表示   AIM YIM MSNM
SonotaCo
Site Admin


登録日: 2004.08.07
記事: 10022
所在地: 139.67E 35.65N

記事日時: Fri Mar 07, 2014 8:47 am    記事の件名: Re: BBF Setting 引用付きで返信

alfredocaronia wrote:
in most part of the cases ( analog camera ) should be left in "OFF"

It is not decided bv camera, but it is decided by capturing(A/D) device.
To say correctly, as for most of the USB capturing device (NTSC/PAL), it should be left in "OFF".

alfredocaronia wrote:
"bbf" should not be set nor in UA Profile nor in UA uty?

May be you are right.

1) The field order should be set correctly on capturing (Profile sheet of UFOCaptureV2 or Input sheet of UFOCaptureHD2).
2) 1) is automatically passed to UFOAnalyzerV2(UA2) through xml, and you can see and change it by the setting of "bbf" on the Profile/Analyze sheet of UA2.
3) UA2 has automated check function of the field order. if "bbf check" setting on Uty sheet is ON, UA2 checks the setting matches the movement of the object in the video.
And issue warning during the analysis if the setting seems not correct. It is just a check, so you can check OFF "bbf check" setting on Uty sheet if it is not needed.


As far as I know, all IEEE1394 capturing device uses Bottom Field First interlace, and all USB NTSC/PAL capturing device uses Top Field First interlace.
But yet there are so many capture device in the world, so there can be exceptions.
トップに戻る
ユーザーのプロフィールを表示   投稿者のウェブサイトに移動
特定期間内の記事を表示:   
新しいトピックを投稿   トピックに返信    SonotaCo.JP Forum Index -> UFOCapture BBS in English All times are GMT + 9 Hours
Page 1 of 1

 
移動先:  
新規投稿: 不可
返信投稿: 不可
記事編集: 不可
記事削除: 不可
投票参加: 不可
このフォーラムで添付ファイルを投稿 できません
このフォーラムでファイルをダウンロード できます


Powered by phpBB © 2001, 2005 phpBB Group
Copyright ©2004 SonotaCo Network. All Rights Reserved.